P10 outdoor LED display in Bengaluru.

Outdoor P10 · PixelSpot LED wall manufacturer, Jalahalli East, Bengaluru · price on request, excl. GST

PixelSpot builds P10 outdoor LED displays, the coarsest pitch we make, for highway hoardings, stadium perimeters and building tops, at its factory in Jalahalli, Bengaluru, and installs them with its own crew across Bengaluru and Karnataka; see LED video wall in Karnataka for work outside the city. A P10 LED screen is read from 10 m and well beyond, at up to 4,500 nits with IP65 at the front and IP54 at the rear. It has no list price: each P10 wall is quoted after a site survey, because the unipole, gantry or rooftop frame, the power run and the permissions are part of the job.

Large-format LED display across the upper floors of a commercial building, read from the street and the road beyond, the kind of wall an outdoor P10 module is built for
A building-top display seen from the road: the P10 use case. The module is 32 x 16 pixels on a 320 x 160 mm board, 10 mm between LED centres, IP65 sealed at the front

What a P10 price includes

P10 is priced on request for your site, so this page carries no per-sq-ft figure. The quotation covers the LED modules, cabinets, a wall-mounted or fascia frame, the controller and installation by PixelSpot's own crew, with a 2-year warranty.
Freestanding pole, gantry and rooftop structures are quoted after the free survey; 18% GST is added on top.

A P10 LED wall is priced for your site: PixelSpot quotes P10 on request from its factory in Bengaluru (Bangalore), because a hoarding is sized to its structure, its road and its mounting. Get a figure, excl. GST, from the configurator or on WhatsApp. It is the coarsest pitch we build. P10 is an outdoor hoarding module: IP65 at the front, IP54 at the rear, up to 4,500 nits, made for a highway hoarding, a stadium perimeter or a building top that people read from 10 m and further. It is not a cheap way to get a showroom or hall screen, and the sections below explain where the 10 m rule puts it. A P10 quotation includes the modules, receiving cards, controller, power supplies, steel frame, cabling, installation by our own crew, PxlOS cloud CMS, 5 per cent spare modules and the 2-year pixel-to-pixel onsite warranty. GST at 18 per cent is extra and the input credit is explained on the HSN and GST page.

P10 outdoor LED display sizes and resolution

Wall sizeAreaP10 outdoor, installedResolution
Per sq ft1 sq ftPrice on request32 x 16 px per 320 x 160 mm module
8x4 ft32 sq ftPriced for your wallScales with width, see note below
10x6 ft60 sq ftPriced for your wallScales with width, see note below
12x8 ft96 sq ftPriced for your wall365 x 243 px
16x9 ft144 sq ftPriced after site surveyAbout 487 x 274 px
20x10 ft200 sq ftPriced after site surveyAbout 609 x 304 px

A 20 x 10 ft P10 wall is 609 x 304 pixels: no more pixels across than a 12 x 8 ft P6, on about twice the surface. That is why P10 only makes sense at hoarding scale and from a long way off. Every size is priced after the free site survey, + GST, with the structure quoted as its own line.

The simplest P10 quote is a plain wall-mounted or fascia install with a Huidu controller, which is the normal build for a display fixed to a parapet, a boundary wall or an existing hoarding frame. The quote rises when the wall needs front-service die-cast cabinets (a building top or a gantry with no walkway behind it), or a NovaStar-based sending and receiving system for a display that carries paid advertising and needs remote monitoring. Three items sit outside the screen price on nearly every P10 project and are quoted as separate lines after the free survey: the freestanding unipole, gantry or rooftop structure with its foundation, the mains supply run from the nearest metered point, and the permission drawings that a landlord, a highway authority or the BBMP asks for on a roadside hoarding. On a large hoarding the structure can cost as much as the screen, so ask for both lines before comparing anyone's price.

The 8x4 and 10x6 ft sizes are in the table because people search for them, not because we recommend a P10 wall that small. A P10 wall is built from 320 x 160 mm modules of 32 x 16 pixels, so real walls round to whole modules and cabinets and the pixel count of each size is stated module-exact on every PixelSpot quotation. Even the 12x8 ft wall has only 365 x 243 pixels, which is enough for a bold logo, a headline and a phone number read from the road, and not enough for a photograph or a paragraph. Most P10 walls we quote are larger than 12x8 ft, and each is priced for its site.

P10 LED display and LED screen price

A P10 LED display, a P10 LED screen and a P10 LED wall are three names for the same product: outdoor P10 modules, 10 mm between LED centres, built into one screen. The price does not change with the name. P10 is priced on request for your site, + GST, so a P10 LED display or LED screen is quoted the same way as a wall: from the size, the structure and the mounting. The configurator gives a figure for your size, and the LED wall price in Bangalore page lists the pitches that carry a per-sq-ft rate.

P10 outdoor LED display specification

SpecP10 outdoor, PixelSpot
True pitch10 mm between LED centres
Module320 x 160 mm, 32 x 16 px (512 pixels per module)
Pixel density(1,000 ÷ 10)² = 10,000 pixels per square metre
Scan rate1/4
BrightnessUp to 4,500 nits, auto-dimming at night
Ingress protectionIP65 front, IP54 rear
Refresh rate3,840 Hz (specify it; 1,920 Hz panels are cheaper and flicker on phone cameras)
Minimum viewing distance10 m
Ideal viewing distanceAbout 20 m, twice the pitch number
12x8 ft resolution365 x 243 px
PriceOn request, priced for your site, excl. GST
Warranty2-year pixel-to-pixel onsite
Typical powerSized at the survey for the wall and its site; the power consumption guide explains how an outdoor wall is wired

Two lines on that sheet tell you whether a "P10" quote from anyone is the same product as ours. The first is the module: 32 x 16 pixels on a 320 x 160 mm board. The same board carries P8 at 40 x 20, P5 at 64 x 32 and P4 at 80 x 40, so the module resolution cannot be fudged; a P6 on the same board is about 53 x 27, so a board with more than 32 x 16 pixels is not P10. The second is the scan rate. At 1/4 scan each LED is lit for a quarter of every cycle, the longest duty of any pitch we build, which is how a P10 module reaches up to 4,500 nits with a modest driver and holds a readable picture in the afternoon sun on an east-west road. That duty cycle also means a P10 wall draws real current at full brightness, so the mains run and the earthing are surveyed rather than guessed; the power consumption guide gives the typical outdoor draw per square metre and the circuit size.

P10 LED module vs a complete P10 LED wall

P10 modules, 320 x 160 mm boards of 32 x 16 pixels, sell for very little online, and that is where many P10 searches start. PixelSpot does not sell them loose. We build and install the complete P10 wall: outdoor cabinets, the unipole, gantry or rooftop frame quoted as its own line, power supplies, receiving cards, the controller, cabling, earthing, PxlOS and the 2-year pixel-to-pixel onsite warranty, all fitted by our own crew. On a hoarding the module is the smallest part of the cost and the least of the risk; the structure, the wind loading, the surge protection and the mains run are what keep a roadside screen standing and lit. Every wall we hand over comes with spare modules, so a damaged one is swapped on site.

Why a P10 wall is priced for your site

If you searched for the lowest LED wall price, the pitch is only part of the answer. Pixel density is (1,000 ÷ pitch)² per square metre, so a P10 module carries 10,000 pixels per square metre against 160,000 for an indoor P2.5 and 640,000 for a P1.2. Sixteen times fewer LEDs than P2.5 means sixteen times fewer driver ICs, a 1/4 scan instead of 1/32, and a module that is mostly board and housing rather than silicon. But the cabinet, frame, power supplies, controller and crew time are much the same whichever pitch goes in, and a P10 hoarding usually adds a unipole, gantry or rooftop structure, a mains run and permissions, so PixelSpot prices P10 for each site on request rather than from a per sq ft list.

The same arithmetic is why a coarse pitch is not a cheap project. A P10 wall is bought by the square metre of road frontage it has to cover, and a hoarding that is read from across a multi-lane road or from the top tier of a stand has to be large to be read at all. A small P10 wall is simply not useful, because 365 x 243 pixels on 12x8 ft cannot draw a product photograph, and from 10 m or closer the viewer sees dots. For a shopfront, a gate or a forecourt read from the pavement, the wall that works is outdoor P4 at about ₹5,100 per sq ft + GST, and the lowest outdoor rate we list is outdoor P6 at about ₹5,000 per sq ft + GST; for an indoor room the entry wall we build is P2.5 at about ₹6,150 per sq ft + GST. If the budget is for a single event rather than a permanent wall, renting from an event-AV company is cheaper than any purchase; we don't rent LED walls ourselves.

P10 outdoor LED screen in Bangalore: where it fits

P10 fits only where every viewer is far away: the far carriageway of a highway, the upper tier of a stand, the road below a rooftop. Ten metres is the minimum, about 20 m is where it looks right, and the wall has to be large for its letters to read at that range, so the classic P10 job is a big LED hoarding or a building-top facade. The price follows the free site survey: we stand where the drivers or spectators are, check the structure and the mains, and quote the wall with the structure as its own line. Any reader closer than 10 m moves the answer to P8 or P6.

The rule is simple: the minimum comfortable viewing distance in metres is about the pitch number, and the picture looks best from roughly twice that. For P10 that is 10 m minimum and about 20 m ideal, and there is no upper limit that matters; a P10 hoarding stays readable as far as its letters are large. Measure from where the nearest regular viewer stands or drives, not from the kerb directly beneath the screen, and count the road width, the setback and the height of the mount. Typical Bengaluru cases where P10 is the right answer:

When to step finer, and why there is no coarser

Step finer to P8 when the nearest regular viewer is between 8 and 10 m, for example a hoarding on a narrower road or a boundary display read from the pavement opposite. It is also priced on request and gives 457 x 304 pixels on 12x8 ft instead of 365 x 243, so on a wall where the first reader is inside 10 m it is the better choice. Step to P6 at about ₹5,000 per sq ft + GST when people read from 6 m, which is a large facade above a wide pavement, and to P5 or P4 for any shopfront, gate or forecourt read from 4 to 5 m. P10 is the coarsest pitch PixelSpot builds. When a hoarding has to be read from further still, the answer is a bigger wall with larger letters, not a coarser module, priced for the site whatever the size.

P10 vs P8 and P6

These are the two pitches a P10 enquiry in Bengaluru ends up choosing between: P8, the next finer hoarding pitch, and P6, the finest of the three.

SpecP6 outdoorP8 outdoorP10 outdoor
Module320 x 160 mm, about 53 x 27 px320 x 160 mm, 40 x 20 px320 x 160 mm, 32 x 16 px
Scan rate1/81/51/4
BrightnessUp to 4,500 nitsUp to 4,500 nitsUp to 4,500 nits
Refresh rate3,840 Hz3,840 Hz3,840 Hz
Minimum viewing distance6 m8 m10 m
12x8 ft resolution609 x 406 px457 x 304 px365 x 243 px
Per sq ft installed, excl. controller and GST₹5,000Price on requestPrice on request
12x8 ft wall with controller, + GST₹5,47,500Priced for your wallPriced for your wall
Right forLarge facades read from 6 m and beyondHoardings and boundary displays read from 8 m and beyondHighway hoardings, stadium perimeters and building tops read from 10 m and beyond

The reading of that table is that P8 draws a sharper picture than P10 on the same board. So P10 is chosen when the nearest viewer is genuinely 10 m or further, where the extra pixels of P8 buy nothing the eye can resolve; both are priced for your site, so ask for the two on the same quote. P6, at about ₹5,000 per sq ft + GST and ₹5,27,000 + GST for a 12x8 ft wall with a controller, earns its place when a facade is read from a pavement at 6 m rather than from a road at 20 m.

What a P10 wall from PixelSpot includes

Designing content for a P10 canvas

A P10 wall rewards restraint. On a 12x8 ft canvas of 365 x 243 pixels a headline, a logo and a phone number fill the frame; a paragraph turns into noise. Use a heavy sans-serif face, keep letters tall enough to read from the far side of the road, and hold high contrast, light text on a dark ground or the reverse, because a driver sees the screen for a few seconds at a time. Avoid thin rules, drop shadows and small script, which break up at this pitch. Full HD is 1,920 x 1,080 pixels, so a Full HD advert supplied for a P10 wall is downscaled hard and its fine detail disappears; ask the advertiser for artwork built at the wall's real pixel size, which is stated on the quotation. Specify 3,840 Hz refresh if the hoarding will ever appear in a reel, a news clip or a stadium broadcast, because a 1,920 Hz panel is cheaper and flickers on camera. The auto-dimming schedule matters more on P10 than on any other pitch: full brightness of up to 4,500 nits into a dark road at night is a glare complaint, and PxlOS steps the brightness down after sunset.

How to get an exact P10 price

  1. Measure the frontage you need to cover and the distance from the nearest regular viewer, whether that is the far carriageway, the front row of a stand or the road below a roof. If that distance is under 10 m, tell us; the answer may be P8 or P6. If the wall is indoors, the answer is not P10.
  2. Use the 60-second LED wall configurator for an instant estimate with GST, spec sheet and BOM, or WhatsApp +91 72048 08334 with the size, a photo of the site from the road and whether the screen faces west.
  3. Book the free site visit. We confirm the pitch from the viewer's position, check the structure, the power and the access, and send a 3D mockup of the wall on your actual building or ground with a fixed quotation that lists the structure and the mains run as their own lines.

The LED wall price guide covers inclusions in more depth, the price by pixel pitch page lists every indoor and outdoor pitch side by side, the pixel pitch guide explains how the number is chosen, and the size pages give worked totals for 8x4 ft, 10x6 ft and 12x8 ft walls. For a shopfront read from closer than 10 m, the Acai Theory shopfront in Indiranagar shows the other end of the outdoor range, a fine outdoor pitch read from the pavement.

Guides: LED wall brightness in nits · Indoor vs outdoor LED walls · LED video wall ROI · Rent vs buy: the break-even

Get a P10 LED hoarding quote for your site

Free site visit and 3D mockup anywhere in Bengaluru. Price in 60 seconds online.

Get Free Quote →

Frequently Asked Questions

What does a P10 outdoor LED display cost in Bengaluru?

Outdoor P10 is priced for your site on request, from PixelSpot's Bengaluru factory, because a hoarding is sized to its structure, its road and its mounting. Send the size and a photo of the site on WhatsApp at +91 72048 08334, or use the configurator on this site, for a figure that includes the frame, controller, installation, PxlOS, 5 per cent spare modules and the 2-year onsite warranty. A unipole or gantry structure and the mains run are quoted as separate lines. GST at 18 per cent is extra.

What is the viewing distance for a P10 outdoor LED screen?

The minimum comfortable distance is about 10 m and the picture looks best from about 20 m, with no practical upper limit as long as the letters are large enough. Closer than 10 m the individual LEDs become visible and P8 is the better choice. Measure from where the nearest regular viewer stands or drives, which for a hoarding is usually the far carriageway.

Is a P10 LED wall Full HD?

No. Full HD is 1,920 x 1,080 pixels and a 12x8 ft P10 wall is 365 x 243 pixels, with 32 x 16 pixels on each 320 x 160 mm module. That is enough for a logo, a headline and a phone number read from the road, and not enough for a photograph or a paragraph. A Full HD advert is downscaled hard on a P10 wall, so artwork should be built at the wall's real pixel size, which is stated on the quotation.

Is there an indoor P10 LED wall?

PixelSpot does not sell one. The P10 on this page is an outdoor hoarding module at up to 4,500 nits with IP65 protection, far too bright and too coarse for a room, where the nearest viewer is never 10 m away. The entry indoor wall we build is P2.5 at about ₹6,150 per sq ft + GST, comfortable from 2.5 m. For a shopfront read from the pavement the answer is outdoor P4 at about ₹5,100 per sq ft + GST.

P10 vs P8 vs P6 outdoor LED display: which should I buy?

P8 and P10 are both priced for your site on request, and P8 gives 457 x 304 pixels on 12x8 ft against 365 x 243, so buy P8 whenever the nearest viewer is inside 10 m and P10 when they are 10 m or further. P6, at about ₹5,000 per sq ft + GST and ₹5,27,000 + GST for a 12x8 ft wall with a controller, is for a facade read from 6 m.

How long do delivery and installation take in Bengaluru?

PixelSpot builds the wall at its own Jalahalli East factory, so the modules, cabinets and frame are assembled and burn-in tested locally rather than shipped from another state, and the same crew installs them. For a P10 hoarding the structure, the mains supply and any permission drawings usually set the schedule rather than the screen itself; the free site visit fixes those and the quotation states the delivery and installation dates. Ask on WhatsApp at +91 72048 08334 for the current lead time on P10.

Put Your Message on the Road

Made in Bengaluru. 2-year pixel-to-pixel warranty. Free site visit and 3D mockup.

WhatsApp +91 72048 08334 →